Part of our Cricut guides – step-by-step help for UK crafters.
By Tarek, CraftsVinyl by Plotto
So there’s a new Cricut on the kitchen table. Maybe it was under the tree, maybe you treated yourself in the sales. Either way, the box is open, Design Space is installed, and now you’re wondering what to actually make.
The good news: you don’t need to master everything at once. Pick one easy project, get a win, and build from there. Here are eight first projects that work on a Cricut Joy, Explore or Maker, and on a Silhouette Cameo too, plus the supplies you’ll need and the few mistakes everyone makes at the start. This page is part of our Cricut beginner guide, and when you’re ready to get to grips with the software, our Cricut Design Space guide walks you round the screen.
New machine? The Craft Studio Kit has everything to get going in one box – a mini heat press, 80 iron-on vinyl sheets, 8 adhesive vinyl rolls and transfer tape. Free shipping all over the UK. See today’s price →
Before you start: what you’ll need
Most machines come with one blade and one mat, which is enough for a first cut. To make the projects below, you’ll also want:
- Iron-on vinyl (HTV) for anything fabric: t-shirts, tote bags, cushion covers, baby vests
- Adhesive vinyl for hard surfaces: mugs, jars, labels, windows
- Transfer tape to move adhesive vinyl designs onto the surface in one piece
- A weeding tool to pick out the bits you don’t want
- A heat source for iron-on: a mini heat press is easiest, but a household iron works
- A spare cutting mat or two, because the first one loses its grip faster than you’d think
You don’t have to buy Cricut-branded materials. Cricut-compatible iron-on vinyl and adhesive vinyl work in Cricut machines with the matching material setting (do a small test cut first) and usually cost far less, which matters when you’re still practising.
8 easy first projects
- A personalised tote bag. The classic first project. A name or a short phrase in one colour of iron-on vinyl, pressed onto a plain cotton tote. Cotton is forgiving, the design is flat, and you’ll use the bag for years.
- Your first t-shirt. Once the tote works, a t-shirt is the same process on a slightly trickier surface. Start with a simple one-colour design on a cotton or cotton-rich tee.
- Pantry and storage labels. Adhesive vinyl labels for jars, tubs and storage boxes. Small, quick and wonderfully satisfying, and great practice for weeding and using transfer tape.
- A name for a school bag or PE kit. Iron-on vinyl names are hard-wearing and much quicker than sewing in labels. A small design, ideal for getting your heat settings right.
- A personalised mug. Permanent adhesive vinyl on a plain mug makes a lovely gift. Hand-wash it to keep the design looking its best.
- A layered paper light box. Download our free Christmas bauble light box SVG and cut it from card. It’s a gentle introduction to layered designs, with no vinyl or heat at all.
- A cushion cover. A bigger iron-on project once you’re confident: a quote, a monogram or a simple shape on a plain cotton cover.
- A baby vest or bib. Tiny, quick and always appreciated. Use a soft, thin iron-on vinyl and keep the design small.
Tip: start with projects 1, 3 and 4. Between them you’ll learn iron-on, adhesive vinyl and small-detail weeding, which covers most of what your machine can do with vinyl.
Iron-on vinyl: the four things to get right
Most first-project disappointments come down to the same four things:
- Mirror the design. Iron-on vinyl is cut from the back, so switch on Mirror before you cut. Forget this and your words come out backwards (everyone does it once).
- Shiny side down. The shiny side is the clear carrier sheet. It goes face down on the mat, so the blade cuts the vinyl but not the carrier.
- Weed carefully. Remove everything you don’t need, including the centres of letters like “a”, “e” and “o”. A weeding tool makes this far easier.
- Heat, pressure and time. Follow the temperature, time and peel instructions supplied with your vinyl. Pre-press the fabric for a few seconds first, and press on a firm surface, not an ironing board.
For a full walkthrough, see our iron-on vinyl guide.
Common first-week mistakes
- Using a brand-new mat that’s too sticky for thin paper or card. Pat it on a clean cotton t-shirt a few times to take the edge off.
- Using a tired mat for vinyl. If vinyl slides about while cutting, it’s time for a fresh mat.
- Cutting your full design first. Do a small test cut every time you try a new material.
- Fabric softener. Pre-wash shirts and bags without it, or the iron-on vinyl may not stick.
Ready for your first project?
You don’t need a cupboard full of supplies to get going, just iron-on vinyl, some adhesive vinyl and a way to press. Our Craft Studio Kit puts all of that in one box, and our Cricut-compatible iron-on vinyl comes in every colour you’ll want for your first projects. Free shipping all over the UK, with free 14-day returns.
And if you catch the crafting bug and fancy selling what you make, have a look at how to start a business with your Cricut or Silhouette.
FAQ
What should I make first with my Cricut? A personalised tote bag in one colour of iron-on vinyl. Cotton is forgiving, the design is flat and you’ll learn mirroring, weeding and pressing in one go.
Do I need Cricut-branded vinyl? No. Cricut-compatible iron-on and adhesive vinyl works with Cricut Joy, Explore and Maker machines, and with Silhouette machines. Choose the closest material setting and do a small test cut first.
Do I need a heat press? Not to start. A household iron with the steam turned off works for small iron-on projects. A mini heat press gives more even heat and makes small items much easier.
Why did my iron-on vinyl come out backwards? The design wasn’t mirrored. Iron-on vinyl is cut from the back, so it must be mirrored before cutting.
What’s the difference between iron-on vinyl and adhesive vinyl? Iron-on vinyl (HTV) is pressed onto fabric with heat. Adhesive vinyl has a sticky back for hard surfaces like mugs, glass and walls.
Can I use these projects with a Silhouette? Yes. Every project here works with a Silhouette Cameo or Portrait, using Silhouette Studio instead of Design Space.
